This is my third (!) attempt at implementing localization support. By
leveraging GTK builder to do most of the `gettext` calls, I can avoid
the whole mess about missing symbols on non-glibc platforms.
Added some documentation too for contributors and translators, just for
good measure.
Supersedes #5214, resolves the GTK half of #2357
When one develops Ghostty while using Ghostty it could lead to an
interesting conundrum: the freshly built Ghostty would use the parent
Ghostty's resources, which would be stale and not reflect any new
changes to resources. This is especially bad for translators, since
their translations would not be reflected in the newly built Ghostty
if they happen to run it under older Ghostty, which is not only
counterintuitive and also painful in terms of workflow.
Now, on debug builds we always try to use the terminfo detection method
first in order to locate the zig-out/share/ghostty folder, and only fall
back to GHOSTTY_RESOURCES_DIR if the executable is for some reason no
longer in zig-out. You can test this behavior by manually moving the
Ghostty executable out of zig-out, and then launching it with and without
Ghostty.
This is my third (!) attempt at implementing localization support.
By leveraging GTK builder to do most of the `gettext` calls, I
can avoid the whole mess about missing symbols on non-glibc platforms.
Added some documentation too for contributors and translators,
just for good measure.
Fixes#5929
Replaces #5984
On macOS, native applications typically never encode any text for
key events that use the command key. This is because the command key
is used for key equivalents and "commands" and should not be used
for text input.
This can be verified with apps like TextEdit but also terminals like
Terminal.app officially but also iTerm2 unofficially. Anything such as
`Cmd+b` or `Cmd+Shift+b` will not produce any text input.
Cross-platform terminals generally don't follow this, for example Kitty
performs CSI-u encoding and Alacritty and WezTerm encode the text as-is
(i.e. `Cmd+b` will produce `b`).
On Linux, the super key (command-equivalent) does produce text input.
For example, `Super+b` will produce `b` in Gnome Console, Foot, and
all the cross-platform terminals mentioned above.
In the interest of matching the behavior of native macOS applications,
we should not encode text for command key events on macOS. We continue
to encode text for the super key on non-macOS platforms.
Remove the flag which reports all scrolls as discrete scrolls. This
enables precision scrolling in GTK. We have to track a flag between
continuous scroll events.
Precision scrolls don't require a multiplier to behave nicely. However,
wheel scrolls feel extremely slow without one. We apply the multiplier
to wheel scrolls only
Make Ghostty behave like other terminals by multiplying scrolls by 3.0.
This only affects when we are reporting arrow keys (alternate scroll
mode) or when we are scrolling the scrollback.
When we report mouse scroll wheel events, they should not be multiplied.
Refactor the scrollCallback to only use a multiplier for viewport or
alternate scroll reports.
Calculate the scroll amount for non-precision scrolls as a direct
multiple of yoff. This fixes an issue where Ghostty sends scroll wheel
events (or arrow keys if in alternate scroll mode) that are variable,
dependent on the screen size. I checked multiple terminals, and each
responds to a single wheel click by sending only a single wheel / arrow
key - independent of screen size.
```sh
printf "\x1b[?1049h"
printf "\x1b[?1007h"
cat -v
```
Using the above procedure, with varying screen sizes:
```
# 50% Screen height
| terminal | arrows keys sent| wheels events sent|
|------------|-----------------|-------------------|
| alacritty | 3 | 1 |
| foot | 3 | 1 |
| xterm | 5 | 1 |
| kitty | 3 | 1 |
| ghostty | 2 | 2 |
# 100% Screen height
| terminal | arrows keys sent| wheels events sent|
|------------|-----------------|-------------------|
| alacritty | 3 | 1 |
| foot | 3 | 1 |
| xterm | 5 | 1 |
| kitty | 5 | 1 |
| ghostty | 3 | 3 |
```
Both ghostty and kitty scale the number of arrow keys sent in proportion
to the screen size. However, when mouse reporting is on, only ghostty
does this.
This commit makes Ghostty behave like foot, and more generally removes
the dependence on screen size.
This adds a note in the default config to note that may require a
restart. Also adds a note with the window-padding-x and window-padding-y
to indicate a restart will be required to update existing windows.
I ran into this while updating one of the existing values in the default
config file. `window-padding-x` The value defaulted to 2 so figured it
was safe to assume and just uncomment it and try reloading the config.
Doing that doesn't work only restarting will make it take effect for the
main window ( or of course more tricky opening new windows and killing
off the old one )
https://github.com/ghostty-org/ghostty/discussions/6022
Fixes https://github.com/ghostty-org/ghostty/issues/5940
The mentioned problem occurs because when creating a new tab through the
tab overview we do not have focus on the terminal area widget, it does
not matter if we have a custom title set or not.
I think it is just safe to remove this check from the code. I've tested
the change and I don't really see a valid use case in which we would not
want to set the window title even if we don't have focus on the terminal
area.
It is possible that fonts people are using don't contain these
characters as evidenced by users in the Discord.
Signed-off-by: Tristan Partin <tristan@partin.io>
Related to #6035
This implements the keybind/action portion of #5974 so that this can
have a binding and so that other apprts can respond to this and
implement it this way.
As noted in the comments, this is so that apprt's can always know what
the default size of a window would be so they can utilize this for
"return to default size" actions.
The initial size shouldn't be treated as a "resize" event and was
already documented as such. Prior to this commit the docs already noted
that the initial size may be sent multiple times but only the first time
during initialization should be used as a resize.
Therefore, this shouldn't impact prior behavior. I've verified this with
the apprts.
Using `gtk4-layer-shell` still seems like the path of least resistance,
and to my delight it pretty much Just Works. Hurrah!
This implementation could do with some further polish (e.g. animations,
which can be implemented via libadwaita's animations API, and global
shortcuts), but as a MVP it works well enough.
It even supports tabs!
Fixes#4624.
This was causing garbled text due to a non-rebuilt rows referencing an
outdated atlas when the DPI changed but not the grid dimensions, which
could be caused by a variety of things such as the quick terminal
slide-in, dpi scaling changes on sleep/wake, moving windows between
displays because of closing/opening the laptop lid, etc.
Fixes#2731
The meaning of "c" and "r" can be somewhat cryptic to non-native English
speakers as it may not be immediately obvious that "c" stands for
"columns", and "r" stands for "rows". I propose replacing them with
left-right and up-down double-headed arrows that convey the same
meaning, but in a truly language-neutral manner.
Related to #2357
The meaning of "c" and "r" can be somewhat cryptic to non-native English
speakers as it may not be immediately obvious that "c" stands for "columns",
and "r" stands for "rows". I propose replacing them with left-right and
up-down double-headed arrows that convey the same meaning, but in a
truly language-neutral manner.
Related to #2357
This was causing garbled text due to a non-rebuilt rows referencing an
outdated atlas when the DPI changed but not the grid dimensions, which
could be caused by a variety of things such as the quick terminal
slide-in, dpi scaling changes on sleep/wake, moving windows between
displays because of closing/opening the laptop lid, etc.
Note that for Debian 12, the blueprints must be compiled on a distro
with a newer version of `blueprint-compiler` and the raw UI XML
committed to git. Debian 12 includes `blueprint-compiler` 0.6.0 which
doesn't support compiling `adw.MessageDialog` even though the version of
`libadwaita` supports it.
